Skip to main content

CERAMIC ULTRA SPEED WAX

Ceramic Ultra Speed Wax from Mafra’s Maniac Line™ is a sealing spray wax that contains ceramic polymers

• Sealant spray wax with super-hydrophobic SiO2 ceramic polymers
• Creates a self-cleaning protective shield
• Leaves paint with a wet sheen look and a deep gloss

INTERNAL PLASTICS SUCH AS THOSE OF THE DOOR OR THE DASHBOARD FADE EASILY AND ARE AMONG THE MOST STRESSED

We have obtained a product that is quick and easy to apply, safe on any material, capable of guaranteeing a high gloss, a deep color with a wet effect.

ALL ROUND PLASTIC PROTECTANT

WE SUGGEST THESE SIMPLE STEPS TO MAKE THE MOST OF THE PRODUCT

STEP 1

Dispense the product directly onto the bodywork or onto a microfiber cloth for a more localized application

STEP 2

To apply it, use a clean, dry, short-haired microfibre cloth, spreading the product evenly over the entire surface to be protected, with vertical and horizontal movements

STEP 3

Finish the treated surface and remove any excess product with a soft, dry and clean long pile microfibre cloth

STEP 4

After application, the product gives the bodywork a look with wet reflections and a deep gloss, the so-called “caramel effect”

CERAMIC ULTRA SPEED WAX

WHEN TO APPLY CERAMIC ULTRA SPEED WAX?

After decontamination or polishing. Decontamination is essential to promote adherence
of the protective and maximize its duration over time.

Depending on the type of contamination present, you can use Iron Remover or Water Spot Mineral Remover to decontaminate
chemical or Clay Bar to carry out mechanical decontamination. After decontaminating or polishing the bodywork we can proceed with sealing with Ceramic Ultra Speed Wax.

CERAMIC ULTRA SPEED WAX

HOW TO MAINTAIN CERAMIC ULTRA SPEED WAX?

For its maintenance we can proceed by alternating Neutral Foam Shampoo used in foam as a pre-wash and as a manual washing shampoo with the double bucket technique.
Ceramic Shampoo for the maintenance of your protections used in foam.
But why do they alternate? Overlaying too much protection leads to saturation of the surface which refuses further protection.
Applying too much protective doesn’t damage the surface but an excess of product is simply rejected with the risk of creating stains or halos.

CERAMIC ULTRA SPEED WAX

HIGH BEADING EFFECT WHICH FACILITATES THE SUBSEQUENT CLEANING PHASES

Ceramic Ultra Speed Wax creates a high beading effect. The drops of water are deposited on the surface with a perfectly circular shape, because they have a smaller contact angle: having a smaller size, they will be lighter and will slide off the surface very easily.
Furthermore, the drops of water will absorb the superficial dirt particles which, thanks to the protection of Ceramic Ultra Speed Wax, do not adhere tenaciously to the surface and, slipping off, will produce a self-cleaning effect which will facilitate subsequent cleaning.

EXPERT ADVICE

CONCENTRATED PRODUCT
DON’T OVERDO IT

FOR A RESULT WITHOUT STREAKS AND STREAKS, USE 2 MICROFIBER CLOTHS, ONE FOR APPLYING AND ONE FOR REMOVING

FIRST DECONTAMINATE THE CAR FOR GREATER ADHESION OF THE POLYMERS ON THE BODYWORK AND INCREASE LIFE AND PERFORMANCE