Mafra’s Maniac Line™ Interior Cleaner Purifier is a safe and effective car interior cleaner, which allows a triple action on the treated surface.
• Safe and effective cabin cleaner
• Penetrates dirt dissolving it without leaving streaks
• Ideal for modern cars where there is a combination of different materials such as leather, microfibre, aluminum and carbon.
• Permanently eliminates difficult mixed dirt such as stains that incorporate organic and inorganic residues.
Interior Cleaner Purifier is a real Interior APC that can be used safely on every internal component: it does not discolor or fade any material, preserving the original finish of fabrics and plastics. It does not stress the fibers but softens them. Revives the colors and does not dehydrate the skin. Its safe use makes it the perfect product for modern cars where combinations of different materials such as leather, microfiber, aluminum and carbon are frequent
Before starting cleaning the interior, we recommend removing personal effects from pockets and glove compartments, not forgetting the less visible places such as under the front seats or in the boot.
In this way it will be easier and faster to proceed with the subsequent cleaning phases.
Then carry out a thorough vacuuming of the surfaces, dust, especially the fine dust that settles between the fibers of the seats, mats and carpets is the main cause of the formation of halos during the drying phase.
Dilute and dispense the product onto a clean, dry microfibre cloth;
Proceed with the cleaning of all surfaces obtaining a triple action: sanitizing and anti-odour detergent.
In case of stuck dirt, carry out a mechanical action with a brush or a brush with soft bristles.
Finish with a soft, damp microfibre cloth.
Interior Cleaner Purifier can be used in different dilutions based on use. Here are the three main dilutions based on the level of dirt
Dilute 1:1 to counteract medium-sized dirt
Dilute 1:3 for ordinary and maintenance cleaning
Use the pure product for extraordinary cleaning or stubborn dirt inside the car
1. Spray the product directly on the surface
2. With a soft bristle brush to obtain an easily workable foam ideal for hard to reach or delicate points such as stitching and embroidery
3. Use the product via Foam trigger by dispensing the product directly into the foam and working it in with a soft bristle brush
